Fortinet Community

ssudhakar · 01-05-2022

Description This article describes the changes in the IPSec load-balance setting from v6.2.6/6.4.6 onwards. IPSec load-balancing is enabled on FortiGate 6000 series and disabled on FortiGate 7000 series by default until v6.2.4/v6.4.2 and this config ...

ssudhakar · 04-16-2021

DescriptionThis article describes the changes in the inspection mode In policies and UTM profiles from version 6.0 to 6.2.SolutionIn 6.0 version.- The inspection mode is set per VDOM.- UTM profiles can be set in flow or proxy mode.- When applying the...

ssudhakar · 04-15-2021

DescriptionFrom '# diagnose load-balance status' if any blade are stuck at 'waiting for configuration sync' status or from '# diagnose sys configsync status' if in_sync=0, then it means that there is a config mismatch. This article describes how to f...

ssudhakar · 03-08-2021

DescriptionOn FortiGate-6000 Series, there is a TFTP server running internally. This articles descirbes the two ways to load an image to FPC.Option 1: From MBD, '# execute load-balance update image '.Option 2: From FPC, Download image from default T...

ssudhakar · 11-04-2020

DescriptionThis article describes agent based FSSO.FortiCarrier license activation and deactivation.FortiCarrier license provides 2 keys. One for FortiCarrier activation and another for deactivation.Example:Carrier license v5: 4D2O-BOC7-TV7P-6PXN-WUP...

Fortinet Community

User Statistics

User Activity

Technical Tip: 'IPSec load-balance setting changes after upgrading to v6.2.6/6.4.6 onwards'

Technical Tip: Change in inspection mode - Flow vs Proxy policy option after upgrade to 6.2

Technical Tip: How to find the config difference between blades in 6K/7K Chassis using 'diagnose sys confsync diffcsum' command

Technical Tip: Procedure to download image on FPC from default TFTP server running on MBD

Technical Tip: FortiCarrier license activation and deactivation

News & Articles

Security Research

Company

Contact Us