Technical Tip: How to configure FortiManager when ...

sjhwang · 11-27-2014

Description This article explains how to monitor the progress of an SQL Database rebuild. Rebuilding the SQL database can be a lengthy process if FortiAnalzyer has a large volume of raw logs. Scope FortiAnalyzer.Solution Before FortiAnalyzer 5.2.1, t...

sjhwang · 11-24-2014

DescriptionBackground:Incoming traffic matching a firewall VIP is considered destination NAT. In this scenario, Routing / Policy lookup is executed after destination NAT has been performed.For information on the order in which inspection is carhttp:/...

sjhwang · 11-18-2013

Description This article describes how to configure FortiManager to push its NAT address to the managed FortiGates. Context: The following FortiGate configuration items can be configured manually; however, they are also overwritten by the FortiManage...

sjhwang · 11-18-2013

Descriptionfilter "none" can be used to capture 802.1q tagging on Fortigate.SolutionFGT60C# diagnose sniffer packet internal1 "none" 6 0 ainterfaces=[internal1]filters=[none]pcap_lookupnet: internal1: no IPv4 address assigned2013-10-09 05:30:32.55025...

sjhwang · 11-09-2013

Description[Topology or network layout]FGT-Ue_L3(Agg)(.1)||45.45.45.0/24||(.2)(Untrust)FGT200B(Port15)(.1)|46.46.46/0/24|(.158)PC- "Untrust" is an aggregate interface based on port13 and port14.- pc1 sends ping packet to FGT-Ue_L3(45.45.45.1).1. PC s...

User Statistics

User Activity

Technical Tip: How to check SQL Database rebuild progress on FortiAnalyzer

When using Port-forwarding VIP, policy matches the port after NATing