Technical Tip: SNMP V3 trap configuration with For...

shlee · 09-27-2015

DescriptionThere are three places where session-ttl can be configured. Priority will be in the order 1 > 2 > 3 as shown below. Session-ttl under firewall service will override settings under firewall policy, and session-ttl under firewall policy will...

shlee · 09-18-2015

Description This article describe that this issue of high CPU may occur when there are more than 2,000 firewall policies in the same VDOM and the majority of the traffic is passing through the policy at the bottom of the list. Any changes made to the...

shlee · 05-25-2015

DescriptionTraffic may experience intermittent issues when there are two or more FortiGate-VMs configured in the same physical Hyper V server with the following criteria:1. Sharing the same virtual switch.2. Virtual switch is configured as trunk and ...

shlee · 05-24-2015

Description This article explains how to add the two hyperlinks under the Release link and Delete link in the Web actions section of the quarantine report email sent from a FortiMail. From the configuration, it appears identical when compared with a ...

shlee · 07-25-2012

Description This article describes that when a FortiGate is running on HA, the SNMP trap sent by the Secondary unit will not be able to be recognized by Trap Viewer. This is because, by default setting, the engine-id will use the serial number of the...

User Statistics

User Activity

Technical Note: Priority of session-ttl settings in FortiGate

Technical Tip: Firewall policy sequence may cause high CPU during policy add/modify

Technical Note: Intermittent connection with two or more FortiGate VM on same hyper V server

Technical Tip: Hyperlink missing from web actions of quarantine report email from FortiMail