Technical Tip: FortiAnalyzer generated reports not...

rsingla · 11-10-2020

Description This article describes how to Calculate Fragmented Packets per second hitting a FortiGate. Scope In the absence of an SNMP monitoring solution or graphs that can display the number of Fragmented packets hitting the FortiGate, a simple pro...

rsingla · 10-08-2020

DescriptionWhen FortiWeb devices are in HA mode, a Virtual MAC address is assigned on the interfaces (except HA heartbeat Interface and Reserved Management Interface) of the Active Device. This helps in seamless & quick shifting of the traffic from A...

rsingla · 10-08-2020

Description FortiGate VIPs will respond to telnet on TCP ports 5060 and 2000, if the fortigate has 'default-voip-alg-mode' set to 'proxy-based'. # config system setting set default-voip-alg-mode proxy-based end Solution If the FortiGate VIPs are resp...

rsingla · 08-27-2020

Description This article describes an issue with FortiAnalyzer where the reports after generation are not visible in the GUI, but they are sent to email recipients without any issue.Scope Generated Reports on FortiAnalyzer GUISolution Check the below...

rsingla · 08-26-2020

DescriptionThis article describes how to generate an automatic event log as a reminder on a FortiWeb when a SSL Certificate is about to expire.ScopeFortiWeb SSL CertificatesSolutionPrior to FortiWeb 6.2, FortiWeb would not generate an event when the ...

User Statistics

User Activity

Technical Tip: How to calculate fragmented packets per second hitting a FortiGate

Technical Tip: FortiWeb Virtual MAC Address Calculation and Changes in new Version from 6.2 GA

Technical Tip: FortiGate VIP responds to telnet on port 5060 and 2000

Technical Tip: FortiAnalyzer generated reports not visible in GUI

Technical Tip: FortiWeb Auto Reminder Event log before SSL certficate Expires

Technical Tip: FortiAnalyzer generated reports not...

KCS