Description This article discusses the maximum number of OSPF neighbors
allowed in FortiOS. Solution The limit of a maximum number of 10 per
VDOM, which is as stated in the Maximum Value table for version 4.3,
5.0.x, 5.2.x is restricted only to the s...
Description In FortiGate, to set status disable under ospf-interface
will only prevent the parameters defined here for the OSPF interface
from being used. It will not disable an OSPF interface and bring down
the OSPF. Solution The behavior described ...
Description In FortiOS v5.2.x and 5.0.x, policy based IPSec is disabled
only in GUI by default. It can be configured in CLI or by using the
Enable feature in the GUI. Once enabled, IPSec tunnels can be used in
the Firewall Policy. Solution To enable ...
Description In FortiOS 4.3.x, the CAPWAP was enabled by default on all
physical and VLAN interfaces. In most cases a FortiAP is only connected
to the internal interfaces to create a private WiFI network inside the
network.However, this can be a poten...
DescriptionIn the version 5.0.x and 4.3.x there were 2 Firewall polices,
one standard from WAN interface to the internal interface with action =
sslvpn and the second one is ssl.root to the internal interface.In the
version 5.2.x, the firewall policy...
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.