Technical Tip: FGSP Configuration Guide for Sessio...

pywong · 09-18-2019

Description This article provides CLI configuration guidelines for Session Sync and Config Sync in Fortigate FGSP (FortiGate Session Life Support Protocol) setup. FGSP parameters are configured from the CLI only. Scope FortiGate.Solution Topology: FG...

pywong · 08-21-2019

DescriptionThis article provides guidance on how to perform split ports on FortiGate 7000 series.SolutionThe Fortigate 7000 series FIM Module supports split port feature.FIM-7904E - Each 40G port can be split into 4x10G/1G interfaceFIM-7910E - Each 1...

pywong · 08-01-2019

DescriptionThis article explains how the execution of CLI command 'unset status' on FortiGate interface does not synchronize changes over to FortiManager. (FortiManager version 6.2.0 GA build 1050) On FortiManager, status of the managed FortiGate is ...

pywong · 06-28-2019

Description This article provides a step-by-step guide on how to gain console access to a Fortigate-7000 Chassis. Scope Any FortiGate-7000 chassis. Solution All FortiGate-7000 chassis models include a front panel management module (also called a shel...

pywong · 04-11-2019

Description This article describes how to configure IPV4 to IPV6 translation on the FortiGate. NAT46 is used to translate IPv4 addresses to IPv6 addresses so that a client on an IPv4 network can communicate transparently with a server on an IPv6 netw...

User Statistics

User Activity

Technical Tip: FGSP Configuration Guide for Session Sync and Config Sync

Technical Tip: How to perform split port on the FortiGate 7000 series

Technical Tip: When the execution of CLI command 'unset status' on FortiGate interface does not sync changes over to FortiManager version 6.2.0 GA

Technical Tip: How to access the console port on the management module of a FortiGate-7000 Chassis

Technical Tip: Configure NAT46 on FortiGate

Technical Tip: FGSP Configuration Guide for Sessio...

Fortinet Training Institute

KCS