Description This article describes how to run IPS engine debug. Scope
FortiGate. Solution The old 'diagnose debug application ipsmonitor -1'
command is obsolete (used for the versions prior to 6.4) and does not
show useful data. Do not use it unless ...
Description This article describes that CLI attributes for custom
signatures are ignored in 6.2 and later versions. Scope FortiGate v6.2,
v6.4, v7.0, v7.2, v7.4 and v7.6. Solution Creating a custom signature as
follows: config ips custom edit "test_s...
Description This article explains how to resolve an OSPF neighbor issue
where the OSPF is stuck in the INIT state. Scope FortiGate v6.2, v6.4,
v7.0, v7.2, v7.4 and v7.6. Solution Topology: See one of the following
articles if an OSPF neighbor is stuc...
Description This article describes how to update FortiGate’s Geo-IP
Database and how to utilize it in blocking/permitting traffic from
specific Geographic location(s). To block or permit traffic based on
their Geographic location(s), this is when the...
Description This article describes how FortiGate allows access (by
default) to an interface IP address even if the interface link is DOWN,
as long as requests are permitted by policy. Scope FortiGate v6.4.
FortiGate v7.0. Solution FortiGate allows ac...