Technical Note: How to detect fragmented packets i...

nsubramanian · 04-09-2021

DescriptionThis article describes best practices for SAML Admin authentication with FortiAnalyzer.SolutionSAML can be enabled across all Security Fabric units, enabling smooth movement between units for the administrator. FortiAnalyzer can play the r...

nsubramanian · 04-09-2021

DescriptionThis article describes best practices for Transparent Mode Issues.SolutionMAC addresses details.Add to the Layer2 network diagram the MAC addresses of the hosts involved in the setup. When reading a sniffer trace taken from a transparent m...

nsubramanian · 01-02-2021

DescriptionThis article describes how to debug IPSec VPN connectivity issues.SolutionIf the VPN fails to connect, check the following:- Ensure that the pre-shared keys match exactly (see The pre-shared key does not match (PSK mismatch error). below)....

nsubramanian · 01-02-2021

Description This articles describes some common challenges of IPsec VPN.SolutionA VPN connection has multiple stages that can be confirmed to ensure the connection is working properly. It is easiest to see if the final stage is successful first since...

nsubramanian · 12-16-2019

DescriptionThis article shows an example of VIP ranges used to perform Source NAT (SNAT) with a static 1-to-1 mapping from internal to external IP addresses. This is similar to using IPpool but with the advantage of having predictable and static 1-to...

User Statistics

User Activity

Technical Tip: SAML admin authentication

Technical Tip: Basic troubleshooting Transparent Mode Issues

Technical Tip: IPSec VPN diagnostics – Deep analysis

Technical Tip: IPSec VPN Diagnostics – Possible reasons

Technical Tip: VIP range for SNAT and static 1-to-1 mapping

Technical Note: How to detect fragmented packets i...

Technical Note: Fix Licensed Mobile Token with Err...

Troubleshooting Tip: Admin user lost FortiToken / ...

Fortinet Training Institute

KCS