Description This article describes that when a deny log with logid
'0001000014' is triggered with IPv6 traffic, even though IPv6 is not
enabled in the FortiGate. For example: Scope FortiGate. Solution This is
the expected behavior if the 'implicit' d...
Description This article describes why some revision numbers in the
Configuration Revision History of FortiManager are missing. Scope
FortiManager. Solution Sometimes, not all revision numbers in the
Configuration Revision History of a device are dis...
Description This article describes a scenario where HA is out of sync
due to a checksum difference in 'system.storage' even when both
FortiGate units are on the same hardware revision. In such scenarios, it
may need to be checked if it is because of ...
Description This article describes the misordering of the address member
configured in 'dst-name' in IPsec phase 2 in the secondary as the cause
of the phase 2 tunnel status being down in the secondary. Scope
FortiGate. Solution The issue is phase 2 ...
Description This article describes how to troubleshoot the problem when
a FortiSwitch fails to be added to FortiGate by FortiLink due to a
missing default switch-controller qos configuration. If a FortiGate
fails to add a FortiSwitch by FortiLink and...