DescriptionThis article describes how to process non-tagged packets on a
transparent unit. When sending NON-Tagged packets from a Switch to a
FortiGate unit in transparent mode, packets are dropped unless the
receiving interface is a physical one.Sol...
DescriptionThis article describes how to manage the traffic with packets
that are not tagged between a Transparent FortiGate and a FortiSwitch.
When receiving traffic to and from a FortiSwitch from a Transparent
FortiGate unit, it is important to be ...
Description This article explains whether FortiAuthenticator can be used
as an authentication portal for TACACS PLUS. Solution The
FortiAuthenticator (FAC) started supporting TACACS+ (TAC-Plus) starting
Description If the current quota on a FortiAnalyzer is not sufficient,
it is possible to increase it to a level that is sufficient for the
intended logging purpose.The impact of increasing disk quota is specific
to the device/cluster and this action ...
DescriptionThe "set capability-default-originate" command when enabled
on a neighbor will enable/disable the advertising of the default route
to the BGP neighbors. Still when deleting a neighbor that includes it
the feature must be disabled first oth...