Technical Tip: How to configure source IP for Secu...

kltam · 03-03-2025

Description This article describes a configuration example to ensure all web traffic is intercepted and processed by the proxy, preventing users from bypassing security controls within FortiProxy's transparent mode Scope FortiProxy. Solution To enabl...

kltam · 12-04-2022

Description This article describes how to disable IPS Intelligent-mode the option to disable IPS intelligent-mode in FortiOS 6.4.3 and later By default, Intelligent-mode is enabled and IPS engine performs adaptive scanning to speed up the scan job an...

kltam · 12-02-2021

Description This article describes steps to determine the Information Elements(IEs) used in GPRS Tunneling Protocol(GTP) and how to whitelist the IE type in FortiOS Carrier GTP profile in case if GTP traffics got dropped by FortiCarrier due the IE ty...

kltam · 12-02-2021

Description This article describes the further steps required in FortiSIEM Supervisor/Collector in order to integrate properly with BlueCoat web proxy. Refer to the doc below for the basic configurations required: https://docs.fortinet.com/document/f...

kltam · 07-14-2020

DescriptionThis article describes the behavior of SSL/SSH inspection profile in firewall policy with SSLVPN web mode only user group. The SSL/SSH inspection profile can be configured in GUI and CLI, however the setting is hidden in '# show firewall p...

User Statistics

User Activity

Technical Tip: How to Force Web Traffic to be Intercepted and Processed in Transparent mode FortiProxy

Technical Tip: How to disable IPS Intelligent-mode

Technical Tip: How to add IE allow lists to GTP profiles

Technical Tips: How to configure Epilog Client in FortiSIEM to integrate with BlueCoat WebProxy

Technical Tip: Firewall policy-SSL/SSH inspection profile with SSLVPN web mode-only user group

Technical Tip: How to configure source IP for Secu...

Technical Tip: How to create Event Handler for For...

KCS

User Statistics

User Activity

You are leaving our website