Description This article describes a use case to block SH file type
using the DLP pattern. Scope FortiGate. Solution By default, the sh file
type is not available under DLP. In this case, it is possible to create
a pattern and apply in the DLP sensor...
Description This article describes how to get the search option to
monitor and de-authenticate the firewall or FSSO users. Scope FortiGate.
Solution Ensure to use the comprehensive mode to get the search option.
When having the optimal mode, the sear...
Description This article explains that TACACS+ accounting is supported
from version 7.0.2. System log entries for login events, configuration
change events, and CLI command audits can be forwarded to the external
TACACS+ server. Scope FortiGate. Solu...
Description This article describes how to view the actual client IP
having X-Forwarded enabled. Scope FortiProxy. Solution Consider this
below topology as an example: Client >> Load balancer(Source is natted
here and X-Forwarded is enabled) >> FortiP...
Description This article describes an issue where the user entry gets
removed before the configured auth timeout value. Scope FortiGate.
Solution This article assumes the timeout type is set to hard timeout
and the authtimeout value is set to 30 days...
Hi @DaVeiga19, You can check by adjusting the engine count and socket
size. config ips global set engine-count 2 [integer, 0-255]set
socket-size 16 or 32 [integer, 0-512]end Refer
link:https://community.fortinet.com/t5/FortiGate/Technical-Tip-IPS-mem...
Hi Business User, It seems to be an issue with Forticlient version. As
you are running free Forticlient version check with FortiClient version
6.0. Refer on this below article:
https://community.fortinet.com/t5/FortiClient/Technical-Tip-FortiClient-S...