You are leaving our website

jmoya · 03-04-2016

DescriptionUTM is not available on NAT64 policies, so a native IPv6 VDOM is required.This article describes how to apply UTM to NAT64 traffic.SolutionTo accomplish UTM filtering, use VDOMs: IPv6 VDOM, using simple IPv6 policies with UTM profiles and ...

jmoya · 12-05-2014

Description This article provides some guidelines as to how to tune up DDoS policies to avoid false positives or block extra traffic. Scope FortiGate. Solution The first thing to understand to apply DDoS policies is that these policies do not rely on...

jmoya · 11-05-2014

Description This article describes an example of how to setup redundant point-to-point IPSec VPN using multi-home BGP links. Scope Applies to all FortiOS versions. Publish an IPsec VPN in a multi-homed BGP Solution Configure multi-homed BGP. Create a...

jmoya · 10-08-2014

Description This article describes how to activate the FortiToken Trial serial numbers included in each FortiGate unit. FortiGate is shipped with two free FortiTokens Mobile per unit with unique serial numbers. This works very similar to the bought l...

jmoya · 09-04-2014

PurposeWhen is required that the Dial-up VPN Clients, get the same IP segment network.ScopeAll FortiOSExpectations, RequirementsOn FortiClient configuration, can be set two IP address to reach a remote destination. Configuration- Create a VDOMconfig ...

User Statistics

User Activity

Technical Tip: How to apply UTM to NAT64 traffic

Technical Tip: How to tune DDoS policies

Technical Tip: How to setup redundant point-to-point IPsec VPN using multi-home BGP links

Technical Tip: How to assign FortiToken Mobile to users on FortiGate and FortiAuthenticator

Technical Note: Redundant Dial-UP VPN

KCS

Fortinet Training Institute