Re: link between public domain and local server

hhasny · 12-01-2025

Description This article describes how to verify which Endpoint profile is assigned to an endpoint device. Scope FortiSASE Solution Multiple Endpoint profiles can be configured on FortiSASE to meet individual or a group of users. Below is an example ...

hhasny · 11-16-2025

Description This article describes the configuration example of using a VIP range to map a 1:1 DNAT IP address from external to internal. Scope FortiGate. Solution In this example, each internal server is mapped to a unique public IP using FortiGate ...

hhasny · 09-29-2025

Description This article describes an issue with the FSSO Collector Agent not being able to receive user information. Scope FortiGate, FSSO Collector Agent in Advanced access mode, DC Agent. Solution The FSSO Collector Agent can be used with or witho...

hhasny · 08-06-2025

Description This article describes how to view the VLAN ID configured on FortiGate via the GUI. Scope FortiOS. Solution To view the actual VLAN ID configured for the interface, the 'VLAN ID' column can be added. This will provide a birds eye view of ...

hhasny · 12-20-2024

Description This article describes the behavior of DNS status in an HA cluster. Scope FortiGate v7.2.x, v7.4.x and v 7.6.0. Solution In a HA cluster environment only the primary role unit would use the configured DNS server for name resolution. The s...

hhasny · 11-05-2025

You can try using ippool with the 'associated-interface'. Refer to this link: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-associate-a-NAT-pool-IP-pool-to-a-physical/ta-p/189738 https://docs.fortinet.com/document/fortigate/6.0.0/c...

hhasny · 08-13-2024

Hi @khaled88 , Are you sharing IPv6 routes? If not, try disabling the ipv6 family. config neighboredit "1.1.1.1"set activate6 disablenextend regards

hhasny · 08-13-2024

Hi @yeowkm99 , Are they both Fortigate firewalls? Try checking both end if the phase2 selector matches first. regards,

hhasny · 08-13-2024

Hi @idepato , Can you PING the sites? Can you traceroute the sites? Check reachability from your Fortigate and client machines first. If they are reachable, run the command shared by pkumari. regards,

hhasny · 05-15-2024

Hi, Verify first the SN matches what you have in the portal. If that good, try the following KB if it helps. https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-license-still-shows-as-expired-after-renewal/ta-p/256101 It will instruct the F...

User Statistics

User Activity

Technical Tip: Identifying which Endpoint Profile is assigned to an endpoint device

Technical Tip: Using VIP range with static DNAT one-to-one mapping from external to internal

Troubleshooting Tip: FSSO Collector Agent Not Receiving User Information from DC Agent

Technical Tip: Viewing the VLAN ID in GUI

Technical Tip: DNS behavior in an HA cluster

Re: Outbound NAT with SD-WAN

Re: Configuration eBGP // HA cluster //

Re: IPsec tunnel shows tunnel is down

Re: I can't load some websites via fortigate

Re: Webfilter license won't work despite having an active subscription

Re: link between public domain and local server

Re: Fortigate Static ARP , MAC Adress Based IP Fil...

Technical Tip: How to enable FIPS-CC mode

Re: Outbound NAT with SD-WAN

Troubleshooting Tip: FSSO Collector Agent Not Rece...

KCS

User Statistics

User Activity

You are leaving our website