Description This article describes the configuration example of using a
VIP range to map a 1:1 DNAT IP address from external to internal. Scope
FortiGate. Solution In this example, each internal server is mapped to a
unique public IP using FortiGate ...
Description This article describes an issue with the FSSO Collector
Agent not being able to receive user information. Scope FortiGate, FSSO
Collector Agent in Advanced access mode, DC Agent. Solution The FSSO
Collector Agent can be used with or witho...
Description This article describes how to view the VLAN ID configured on
FortiGate via the GUI. Scope FortiOS. Solution To view the actual VLAN
ID configured for the interface, the 'VLAN ID' column can be added. This
will provide a birds eye view of ...
Description This article describes the behavior of DNS status in an HA
cluster. Scope FortiGate v7.2.x, v7.4.x and v 7.6.0. Solution In a HA
cluster environment only the primary role unit would use the configured
DNS server for name resolution. The s...
Description This article describes a BGP peer flapping due to an IPv6
advertisement. Scope FortiGate. Solution When FortiGate peers with other
devices, there are instances where the BGP peering with IPV4 would flap
even though the link is stable. Whe...
You can try using ippool with the 'associated-interface'. Refer to this
link:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-associate-a-NAT-pool-IP-pool-to-a-physical/ta-p/189738
https://docs.fortinet.com/document/fortigate/6.0.0/c...
Hi @idepato , Can you PING the sites? Can you traceroute the sites?
Check reachability from your Fortigate and client machines first. If
they are reachable, run the command shared by pkumari. regards,
Hi, Verify first the SN matches what you have in the portal. If that
good, try the following KB if it helps.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-license-still-shows-as-expired-after-renewal/ta-p/256101
It will instruct the F...
