Description This article describes how to address the dot1x
EAP-PEAP-MSCHAPv2 Authentication failure with error 'Credentials Invalid
(MSCHAP2)'. Scope FortiNAC, Windows 11 22H2. Solution In Windows 11 22H2
and above, Considerations and known issues w...
Description This article describes how to integrate Juniper MIST Cloud
with FortiNAC-F v7.6.x. Scope FortiNAC-F v7.6.x. Solution Access the
Juniper MIST cloud account and go to Organization -> Settings. Then
scroll down and select 'Create Token' unde...
Description This article describes how to verify the SSL certificates
imported into FortiNAC using the CLI. Scope FortiNAC-F v7.6.x. Solution
The command below will display the detailed information of the SSL
certificates imported into FortiNAC using...
Description This article will guide in the FortiNAC-F migration phase
from VMware to Nutanix. Scope FortiNAC-F 7.2.X. Solution Import FortiNAC
Database from Vmware to KVM FortiNAC-OS 7.2.x On the new NACOS VM
complete the Config Wizard for an initial...
Description This article describes how to customize the login button
background color for Linkedin and Azure or Entra-id and remove the
Windows sign. Scope FortiNAC. Solution To change the button background,
go to Portal -> Portal Configuration -> ex...
Unfortunately, FortiNAC does not support the "Aruba-Port-Bounce" VSA.
However, you can check whether your switch model supports the
Cisco-AVPair shown below. I have seen that some AOS-CX switches do
support these AVPs Cisco-AVPair='subscriber:command...
I do see that Attribute 5 and 40 were sent empty. Please capture the CoA
traffic + RADIUS traffic and upload the pcap.# execute tcpdump -i -v any
host and port 3799 or 1700 or 1812 or 1645 -w
radius.pcaphttps://community.fortinet.com/t5/FortiNAC-F/T...
Check from FortiNAC CLI and run the following tcpdump command to see
which attributes are being sent by FortiNAC, if correct attributes are
sent, then you need to check with Aruba why the switch is not accepting
the request # execute tcpdump -i -v an...
Check the following doc under "RADIUS Attribute Group Response Value"
should help you in achieving what you
want.https://docs.fortinet.com/document/fortinac-f/7.6.0/rfc5176-coa-disconnect-message/600014/how-it-worksbr,Hawada
