Fortinet Community

harshithbn · 11-05-2020

DescriptionThis article describes how to disable Telnet access for FortiExtender when connected over Cloud.Solution- Get access to FortiExtender via SSJ and make below change: FEXT # config system interfaceFEXT (interface) edit ? <----- To check list...

harshithbn · 06-01-2020

DescriptionThis article describes how to ‘clean up’ unused disk space from Forticonnect.Related Links.https://docs.fortinet.com/product/forticonnect/16.9https://s3.amazonaws.com/fortinetweb/docs.fortinet.com/v2/attachments/af3120b2-243a-11e9-b20a-f8b...

harshithbn · 11-22-2018

DescriptionThis article describes the minimum requirement to bring up FortiAP-221E(FortiAccessPoint-221E)SolutionFortiAccessPoint-221E was introduced in August-14-2017 and it comes up with firmware 5.4.4-build-x.It requires FortiOS – 5.6.1 and later ...

harshithbn · 09-11-2017

Description This article explains how to collect sniffer captures on each port of a Fortiswitch. Scope FortiSwitch v3.x or later. Solution By default, diag sniffer on internal will only show traffic going to the internal port. In order to get the sni...

harshithbn · 03-21-2017

Description This article addresses the use of special characters in the credentials used when forming a cluster in IDM. Solution Special characters such as +, # and % should not be used in the credentials when forming the cluster in IDM. The credenti...

Fortinet Community

User Statistics

User Activity

Technical Tip: Disable Telnet access for FortiExtender when connected over Cloud

Technical Tip: Clean up space in FortiConnect

Technical Note: Minimum Requirement to bring up FAP221E

Technical Note: How to collect sniffer captures in each port in FortiSwitch

Technical Tip: Avoid special characters in credentials to be used when forming a cluster in IDM

Fortinet Training Institute

KCS