DescriptionIn some scenarios, mode config option may is disabled on a
dialup client-to-site IPsec VPN tunnel. The Assigned IP address, DNS
server and split tunnel addresses is manually set. However, the split
tunnel option is not visible in the GUI o...
Description This article describes how local-in policy behaves with
ingressing ESP packets.Solution A local-in policy can be created to
block ESP (protocol 50) packets, but this is not recommended as a main
security practice as it eliminates SPI vali...
Description This article describes how to downgrade to the last firmware
image after upgrading. Solution When FortiGate is upgraded, the previous
firmware image that was running before the upgrade will still be stored
as a backup firmware image on th...
DescriptionPolling FortiGate from SolarWinds via SNMPv3 with AES256
encryption fails despite all configuration parameters being correct.
This sometimes can be caused by difference in the method used by each
appliance to manipulate encryption key size...
PurposeThis article explains how to access features for FortiClient
users when the Mode config option is disabled on a dialup client-to-site
IPSec VPN tunnel. Normal 0 false false false EN-GB X-NONE AR-SA /* Style
Definitions */ table.MsoNormalTable ...