Description This article describes how to change the security profile
inspection mode. Scope FortiGate. Solution To change the inspection mode
on the GUI, the following setting must be enabled in the CLI: config
system settings set gui-proxy-inspecti...
DescriptionFortiOS v5.4.x offers the possibility to filter logs directly
from the policy page, this is a useful time saving shortcut.SolutionGo
to Policy & Objects > IPv4 Policy > Select a policy, right click on the
policy and select 'Show Matching L...
DescriptionTo avoid the name requirement and be able to create unnamed
policies in FortiOS 5.4 you can run the following commands:FortiGate#
config system settingsFortiGate(settings)# set gui-allow-unnamed-policy
disableFortiGate# end Normal 0 false ...
DescriptionThis article explains how to change the captive portal port
through CLI.SolutionIn case the default port of the Captive Portal (1000
for HTTP and 1003 for HTTPs) needs to be changed to another one, issue
following command: FortiGate# confi...
DescriptionThis article explains how to clone a policy as the reverse of
an existing policy in FortiOS v5.4. SolutionGUIGo to Policy & Objects >
IPv4 Policy, do right click over the original policy and select 'Clone
Reverse':This will add a de-activa...