Fortinet Community

heng · 02-14-2023

Description This article describes the easy way to verify the running SSH server version in the FortiManager/FortiAnalyzer. Scope FortiManager/FortiAnalyzer. Solution From Windows or Linux machine, it is simply possible to run a Telnet to the port nu...

heng · 12-02-2022

Description This article describes how to update the Antivirus engine to FortiGate via FortiManager. FortiGate can points to FortiManager to update its FortiGuard packages e.g. like Anti Virus signature, IPS signature and others. It is also possible ...

heng · 12-01-2022

Description This article describes how to identify the current FortiGuard packages version that being used by all the managed devices. Example: The AntiVirus engine version, IPS engine version, ISDB version and etc. Scope FortiManager 7.2 & FortiGate...

heng · 11-13-2022

Description This article describea how to tabulate the data in the Application Performance widget under FortiView -> Monitors -> Secure SD-WAN Monitor. There are two widgets in the Secure SD-WAN Monitor that provides visibility for user application o...

heng · 11-06-2022

Description This article describes how to enable FortiManager/FortiAnalyzer VMware ESXi instance to support more than 8x CPU cores. Scope FortiManager/FortiAnalyzer VMware ESXi only. Solution 1) Shut down the current running instance via GUI or CLI c...

heng · 10-25-2022

Hi there, Please refer to the following admin guide and make sure the Service Profile, Service Chain and Service Rule was configured in the NSX-T side. https://docs.fortinet.com/document/fortimanager/7.2.0/administration-guide/220682/creating-vmware-...

heng · 10-24-2022

Hi there, Try, 1) Login via CLI SSH and try ping to any of the FQDN and make sure it able to resolve. exe ping www.fortinet.com 2) If not able to resolve, check configured DNS setting, if the system DNS is correct, then check step (3). show system dn...

heng · 06-06-2022

The portal login not only provides PAP, but there is CHAP option which provides better security than PAP that you can opt for. If you have other authentication protocol to fulfil over your network governance, you can always raise a new feature reques...

heng · 05-19-2022

Hi, If all configuration is all good in the VPN manager with community creation as well as the managed devices being added, the install should have the changes to be pushed. If it is not as your problem statement, you can open a TAC case for TAC supp...

Fortinet Community

User Statistics

User Activity

Technical Tip: How to verify the running SSH server version

Technical Tip: How to update AV Engine to FortiGate via FortiManager

Technical Tip: How to identify the running FortiGuard packages version for the managed devices

Technical Tip: How to tabulate the data in the Application Performance widget under FortiView Secure SD-WAN Monitor

Technical Tip: How to enable FortiManager/FortiAnalyzer VMware ESXi instance to support more than 8x CPU

Re: Forti-manager (v7.2.1) and NSX-T (3.2) integration error

Re: FortiManager: login GUI

Re: FortiPortal and RADIUS

Re: Fortimanager 7.03 unable to push configuration from VPN Manager

Technical Tip: How to enable FortiManager/FortiAna...

Technical Tip: How to enable IOC re-scan

Technical Tip: CLI Command to display all entitlem...

Re: FortiPortal and RADIUS

Re: Fortimanager 7.03 unable to push configuration...

Fortinet Training Institute