Technical Tip: Configuring multiple Syslog servers

dsharma · 04-19-2019

Description This article describes how to enter a '?' question mark character in the FortiGate CLI.Scope FortiGate.Solution '?' is used in the FortiGate CLI for the following purposes: To display brief help during command entry. Press the question ma...

dsharma · 04-15-2019

Description This article describes FortiGate traceroute options that can be used for various troubleshooting purposes. One particularly useful option is source. Scope FortiGate.Solution There may be specific cases where the default values in tracerou...

dsharma · 04-15-2019

Description This article describes the method to prevent the public FortiGate interface from responding to ping requests.Scope This is a feature introduced starting from version 5.6Solution The factory default configuration of the interface of the th...

dsharma · 04-02-2019

Description This article provides the CLI commands that are available on FortiOS v6.0 to clear statistics per policy. Scope FortiGate.SolutionGUI Method:'Right-click' on the policy (under Bytes filter) and use the 'Clear counters' action: CLI Method:...

dsharma · 04-02-2019

Description This article describes the Syslog server configuration information on FortiGate. Scope FortiGate. Solution FortiGate can send syslog messages to up to 4 syslog servers. Separate SYSLOG servers can be configured per VDOM. CLI command to co...

User Statistics

User Activity

Technical Tip: How to enter '?' (Question mark character) in the FortiGate CLI

Troubleshooting Tip: Using traceroute options from FortiGate CLI

Technical Tip: Rejecting an outside ping request

Technical Tip: How to reset the firewall policy counter field