Technical Tip: How to block SSL VPN Connection fro...

darisandy · 04-14-2025

Description This article describes NP Modules on FortiGate virtual appliances. Scope FortiGate VM. Solution Network Processor is a hardware acceleration module that is used to offload high volume network traffic. As the name implies, it is only avail...

darisandy · 04-13-2025

Description This article describes about issue when internal web traffic uses port 8008. Scope FortiGate. Solution There may be cases wherein the user's internal web server is using port 8008. Accessing the server from the same subnet is working. But...

darisandy · 02-10-2025

Description This article describes the empty FortiView Sessions dashboard after upgrading to v7.4.5. Scope FortiGate 7000F Series. FortiOS version 7.4.5. Solution By accessing the management IP address of the FortiGate Chassis, it will be connected t...

darisandy · 02-09-2025

Description This article describes how to troubleshoot if the firewall policy is not showing byte counts after the FortiOS upgrade. Scope FortiGate-7000F Series v7.4.5. Solution After an upgrade to v7.4.5, the firewall policy shows 0-byte counts on t...

darisandy · 01-14-2025

Description This article describes how to configure a Web Filter profile for incoming connection to a Virtual IP object Scope FortiGate. Solution Most of the time, a Web Filter profile is used to restrict outgoing connection from internal users to th...

darisandy · 12-07-2023

The numbers on datasheet was done on lab environment and those are only a benchmark of what the hardware could possibly handle. But I believe only Fortigate product team know exactly how the test was done. For any capacity planning enquiries, I would...

darisandy · 12-07-2023

you can create VLAN interface (tagged interface) under that one physical interface https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-a-VLAN-tagged-interface-802-1q-on-a/ta-p/193893 after that you can specify the default route,wh...

darisandy · 12-07-2023

few articles you can read up about it : https://community.fortinet.com/t5/Support-Forum/why-do-we-assign-secondary-IP-address/m-p/219857 https://community.fortinet.com/t5/FortiGate/Technical-Tip-Set-a-secondary-IP-on-a-FortiGate-interface/ta-p/226046

darisandy · 12-03-2023

Based on the available command you shared, I don't think it's possible. Once the ports are member of LACP interface, most likely that older version can't refer to the physical port anymore.

darisandy · 12-03-2023

It's a bit tricky to set management access on FGT Transparent Mode. You may want to check docs send by Minh for more detailed deployment. Usually when you have multiple VLAN going through FGT, you need to define forward domain. So the traffic will no...

User Statistics

User Activity

Technical Tip: Network Processor (NP) module on FortiGate virtual appliance

Troubleshooting Tip: Internal Web traffic is not working on port 8008

Troubleshooting Tip: FortiView Session is empty after upgrade on FortiGate 7000F Series

Troubleshooting Tip: Firewall Policy 0 Bytes Count after Upgrade on FortiGate-7000F Series

Technical Tip: Web Filter Profile for incoming a Virtual IP connection

Re: FG-60F Performance Questions

Re: Two ISPs different VLAN

Re: Fortigate Interface settings

Re: problem with HA monitored interface configuration for LACP interface

Re: About management IP settings in transparent mode

Technical Tip: How to block SSL VPN Connection fro...

Re: Remote RADIUS Server on a VPN

Technical Tip : Behaviour Change of SD-WAN Member ...

Technical Tip : BGP Routing process when 'Soft Rec...

Technical Tip: Configuration Change on Secondary u...

Re: Source Nat with destination port

Re: Integration of Fortigate with Zabbix

KCS

User Statistics

User Activity

You are leaving our website