Technical Tip: FortiView Secure SD-WAN Monitor

ckarwei · 07-21-2022

Description This article describes how to use FortiManager as local FDS and the configuration needed on FortiGate. Solution 1) After enabling service access for 'FortiGate Updates' and 'Web Filtering' on FortiManager interface, there is option to 'Bi...

ckarwei · 06-01-2022

Description This article describes how to verify FortiGate to FortiManager (FGFM) protocol TLS version. Scope FortiGate Solution 1) Port 541 is the default port for FGFM protocol. To verify the TLS version, it is possible to run FortiGate build-in pa...

ckarwei · 05-25-2022

Description This article describes how to troubleshoot SAML login fail with invalid response. Solution 1) FortiManager/FortiAnalyzer GUI may return the following error after SAML user authentication. invalid_response: Could not validate timestamp: no...

ckarwei · 04-27-2022

Description This article describes available flags on FortiManager set-dev-upgrade cli command. Solution 1) There are flags in '# diagnose fwmanager set-dev-schedule' CLI command and multiple flags can be use separated by '|'. FMG01 # diagnose fwmana...

ckarwei · 03-29-2022

Description This article describes the configuration needed to display data in FortiAnalyzer secure SD-WAN monitor. Scope FortiAnalyzer. Solution A 'No Device Selected' message will appear if FortiAnalyzer does not receive the necessary SD-WAN logs. ...

ckarwei · 07-26-2022

Running a sniffer on the FMG may show us some clue here. Try filter 1443, 22, icmp and check the difference. https://docs.fortinet.com/document/fortimanager/6.4.7/cli-reference/742130/sniffer

ckarwei · 07-25-2022

I'll suggest to try using custom https port. Probably something to do with the multihome setup. config system admin setting set https_port 1443end https://10.10.10.2:1443

ckarwei · 07-25-2022

Have you verify the https port? config system admin setting set https_port xxxend

ckarwei · 02-08-2022

Thanks for pointing that out! I have submitted the change.

ckarwei · 02-07-2022

Hi Axel, This is for FortiManager CLI. FortiAnalyzer secure sd-wan monitor will follows the log retention policy.

User Statistics

User Activity

Technical Tip: FortiGate configuration for using FortiManager as local FDS

Technical Tip: How to verify FortiGate to FortiManager (FGFM) protocol TLS version

Technical Tip: SAML login fail with invalid response

Technical Tip: 'fwmanager set-dev-upgrade' flags & usage

Technical Tip: FortiView Secure SD-WAN Monitor

Re: FMG-VM installed on Hyper-V on Windows 10 Pro

Re: FMG-VM installed on Hyper-V on Windows 10 Pro

Re: FMG-VM installed on Hyper-V on Windows 10 Pro

Re: Technical Tip: Enable history time filter in SD-WAN monitor

Re: Technical Tip: Enable history time filter in SD-WAN monitor

Technical Tip: FortiView Secure SD-WAN Monitor

Technical Tip: Verifying FortiGuard connectivity o...

Technical Tip: How to configure email alerts for c...

Technical Tip: FortiGate configuration for using F...

Technical Tip: Configure SAML SSO login with Azure...

KCS