Fortinet Community

cgustave · 11-03-2016

DescriptionThe conserve mode self protections mechanisms will be changed in 5.6, main differences are : - no more distinction between "kernel" versus "Proxy" or "system" types of conserve mode - definition of 3 thresholds "green", "red", "extreme", a...

cgustave · 01-31-2013

PurposeThe purpose for this article is to clarify how Reverse Path Forwarding (RPF) is implemented on the FortiGate.It also explains how the vdom specific cli setting "config system settings -> set strict-src-check" modifies the RPF behaviour.Behavio...

cgustave · 09-11-2012

Purpose This article explains how to use the online "FortiGuard Analysis and Managed Service" (FAMS) to backup and restore a FortiGate configuration.The FAMS service is a free service allowing storage of up to 1 GB of data for low end units which are...

cgustave · 06-04-2012

Purpose Presents pre-ips anomaly feature available on NP2 and NP4 accelerators.NP2 and NP4 are 2 types of network accelerators. They may be either on the FortiGate board or within an interface module. Example for NP2: on board: FortiGate310B, FortiGa...

cgustave · 05-29-2012

PurposePresents the hardware accelerated SYN proxy feature available with SP modules from CE4, XE2, XG2 cards and FortiGate 3140B.ScopeFortiGate with Service Processor (build-in or with module)Modules: ADM-XE2, ASM-CE4, FMC-XG2FortiGate: FortiGate 31...

Fortinet Community

User Statistics

User Activity

Technical Tip: Conserve mode changes

Technical Note : Reverse Path Forwarding (RPF) implementation and use of strict-src-check enable|disable

Technical Note : Configuration backup and restore with FAMS (FortiGuard Analysis and Management Service)

Technical Note : Pre-IPS Anomaly in hardware (NP2, NP4), also called fp_anomaly

Technical Note : Service Processor (SP), SYN proxy

Fortinet Training Institute