Description This article provides a list of resources for the "Unable to
Setup VPN" error that can occur in different scenarios when using the
IPSEC VPN Wizard. Scope FortiGate Solution The error 'Unable to Setup
VPN' happens in the last step of recr...
Description This article describes why recreating a remote access IPsec
VPN can generate the error 'Unable to Setup VPN'. Scope FortiGate.
Solution The error 'Unable to Setup VPN' happens in the last step of
recreating an IPsec Remote Access VPN. Thi...
Description This article describes how to resolve the error 'Gateway is
not unique for the same interface' when creating a link-monitor in the
CLI. Scope FortiGate. Solution When creating a new link-monitor in the
CLI and entering the gateway IP, the...
Description This article describes why recreating an IPsec VPN may fail
with an error 'Unable to setup VPN' when using the IPsec Wizard due to
duplicate elements from the previous IPsec VPN with the same name which
already exists. Scope FortiGate. So...
Description This article describes why the webcache feature is not
available on some models. Scope FortiGate x0 models. Solution When
prompted to enable webcaching on a policy, check first if the FortiGate
has a disk. This is easily noted by the mode...
You can set up an automation stitch. See the following article for more
details:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-permanently-block-SSL-VPN-failed-logins/ta-p/287171
You can also refer to these two links for some guidance:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Restrict-YouTube-access-to-specific-channels/ta-p/197740
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/190873...
It does go into some detail about it in the hardening guides.
https://docs.fortinet.com/document/fortigate/6.4.0/hardening-your-fortigate/995103/building-security-into-fortios
https://docs.fortinet.com/document/fortigate/7.2.0/best-practices/555436/h...
On the FortiGate, the Network > Interfaces page, you can see the
FortiGate interface connected to the FortiSwitch unit. The GUI indicates
Dedicated to FortiSwitch in the IP/Netmask field. There's a column to
the very far right that has clickable refe...
You can try to go through the steps in the following article:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Transfer-the-DDNS-record-to-new-FortiGate/ta-p/196467
If that doesn't work, create a support ticket and we will be happy to
help y...
