Description This article describes how to identify inconsistent signal
strength on WiFi on FortiWiFi50G and discuss possible solution. Scope
FortiWiFi. Solution In this scenario a host (laptop) is connected on a
SSID on the FortiWiFi. The FortiWiFi d...
Description This article describes how to troubleshoot, confirm, and
resolve an issue where '/data2/madb.dat file size not match' log appears
after a bootup sequence, and reaffirm that it is not a RMA issue. Scope
FortiGate. Solution To confirm the i...
Description This article describes potential reasons and fixes for
Intra-zone traffic logs missing. Scope FortiGate. Solution For the
intra-zone traffic to function, there is no need to configure additional
policies. It is enough to have the zone con...
Description This KB article describes how to solve Interface Bandwidth
Widget issue after upgrading to a higher speed interface on NP7. Scope
FortiGate. Solution Under special circumstances, once an upgrade to
higher speed interfaces in a LACP on NP7...
Description This article explains troubleshooting steps and possible
remedied for connectivity issues WiFi clients and the
FortiGate/FortiWiFi. Scope FortiGate. Solution Combining WiFi network
and wired LAN within a software switch is a common config...
Hello Ysonon, I remember fondly when I entered the Network Security
world in 2016. I started by listening to cisco CCNA course on CBT
Nuggets from Jeremy Cioara. It was not just I was learning something
what I liked, I also really liked how fun it wa...
Hello amnetworking, Support for 200B has expired on 1st April 2020 and
for OS 5.2 on 13rd December 2018, therefore, this vulnerability patch
won't be provided for these hardware/software. You are welcome to
contact your account manager/sales engineer...
Hello InspirationIT, Can you please provide "diagnose hardware
deviceinfo nic port2". It might be a speed negotiation issue between the
ports, so hard coding the speed might
help:https://community.fortinet.com/t5/FortiGate/Technical-Tip-Changing-the-...
Hello noc_92, It seems your admin account is erased. As per the previous
comment, check in the configuration which admin accounts are left
configured, so you can edit some of them. Regards,
Hello Boban, I have checked, you have even older firmwares (down to 2.8
and earlier) and there I saw that you have firmwares for sure. All you
need to have is one active support device with which you can have access
to download it. Regards,
