Help
aionescu
Staff
Staff
‎07-28-2022
Last activity: Jul 28, 2022 10:34:20 AM
20 Profile 20% Complete

User Statistics

Most Liked Posts Recent Solutions
No Content Available

User Activity

Technical Tip: Local-out IKE traffic match Policy Based Routing

06-30-2022
Description This article describes how to configure the FortiGate so local-out IKE traffic matches configured Policy Based Routing Scope FortiGate v 6.4.9, 7.0.2 and 7.2.0. Solution There are cases when IKE local-out traffic needs to match a configur...

Technical Tip: OSPF over dynamic tunnel with 'net-device disable' and 'mode config'

05-31-2022
Description This article describes how to configure OSPF over a dynamic tunnel with 'net-device disable' and 'mode config'. Scope FortiGate Solution The topology consists of two firewalls, in a hub and spoke topology. Overlay IPs of the Spokes (10.10...

Technical Tip: Fix issues with IPsec tunnels configured with an IPpool as local gateway

05-26-2022
Description This article describes how to fix issues with IPsec tunnels configured with an IPpool as a local gateway. Scope FortiOS 6.4.9 and FortiOS 7.0.1. Solution Updating the firewall to FortiOS 6.4.9 or 7.0.1 might create issues with IPsec tunne...

Technical Tip: Advertise static routes via BGP and filter default static route

02-24-2022
Description This article describes how to configure the FortiGate to advertise, via BGP, static routes but filter the advertisement of the static default route. Scope Solution In this setup, there are two units involved the HUB and the SPOKE. On the ...

Technical Tip: OSPF over dial-up IPsec VPN

01-31-2022
Description This article describes how to configure OSPF over a dial-up IPsec VPN tunnel Scope FortiGate Solution The setup in this example consists of a hub and spoke topology. The spoke (FortiGate 60F) connects to the hub (FortiGate 100F) via a dia...
View more
My Accepted Solutions
View all
Kudos given to

Contact Us