Description This article describes Fortigate NAT traceroute IP address
disable. Scope Solution 1) Create a custom service for ICMP type 11 code
0. # config firewall service custom edit "ICMP_TYPE 11" set protocol
ICMP set icmptype 11 set icmpcode 0 n...
DescriptionThis article describes how to see the FortiSandbox limit from
FortiCloud GUI.SolutionUse the below command.# config system global set
gui-fortisandbox-cloud enableend
DescriptionThis articles describes how to configure a secure SSL
connection from the FortiGate to the ICAP server.SolutionA secure SSL
connection from the FortiGate to the ICAP server can be configured as
follows.# config icap server edit "server" se...
DescriptionThis article explains how to control the time out between
re-sending authentication requests to radius server.SolutionIt can be
set from 1 to 300 sec.Default Value is 5 sec.Related
document.https://docs.fortinet.com/document/fortigate/6.2....
DescriptionThis article describes how to check MAC-address table in
Transparent mode.SolutionIn transparent mode, to forward L2 traffic, the
FortiGate does actually rely on its L2 forwarding database, which can be
dumped with the command '# diag netl...
Hi Kalliem Please refer below article for more details on license expire
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/289376/license-expiration
Regards Anas
Hello You may refer below article for best practices for IPS profile
https://community.fortinet.com/t5/FortiGate/Technical-Tip-IPS-best-practices-Intrusion-Prevention-System/ta-p/198360
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attach...
Hi Paul Please refer below article about log management
https://docs.fortinet.com/document/fortigate/6.4.0/best-practices/730764/log-management
Regards Anas
Hi During the issue time do capture below logs diag sniffer packet any "
host 8.8.8.8 and icmp " 6 0 a Need to look into the packet drop/delay in
response