Hi all, I setup a Hub and Spoke VPN on a 60F to a 100F using the VPN
Wizard and the easy configuration key and it connected fine but I
realised that when I was adding some firewall rules that I'd named the
VPN wrong and is causing some confusion so I...
Hi all, I've setup a 60F router as an SSL client to connect via SSL VPN
to our Head Office router (100F) and this works fine from the client
side of the network in that I can plug a laptop into the 60F client
router and browse to all the network devi...
Hi all, Someone kindly gave me a link to a guide to setup a 60F router
as an SSL VPN client to connect to a 100F at our head office (we can't
use IPSEC on this
location)https://docs.fortinet.com/document/fortigate/7.0.0/new-features/508779/fortigate-...
Hi all, I've had a look on the internet and on the forum but I can't see
any instructions on setting up a site to site VPN using SSL ? There are
a couple of posts asking this but no responses and I've been informed by
a colleague that this option is ...
Hi all, I've inherited a network with a 200F Analyzer and so i've not
used one of these before but i'm trying to find a log that will show me
connect and disconnect times for the past month or two for a certain
user ? Where is the best place to look ...
Not yet, it worked fine the first time and i've gone through the same
procedure again so was hoping i was just missing something like cookies
on the browser or something
Hi ianoakwell....i did but it was nothing to do with the routers, i
managed to determine that it was only with "some" of the HP thin clients
there and there was a problem with the firewall settings but there was
also another device on there (a printe...
I've just done some more packet captures and noticed that the ping from
the head office/server router DOES actually get to the client router
however it's not coming from the lan IP of the head office router (as i
searched for in the previous capture)...
Thanks knaveenkumar,I've got a firewall policy on each side and these
are both set to allow all source and all destination (while i test it)
so DO you mean the firewall policy with regards to the subnets ?also the
routing table on the head office/ser...