Hi All,I purchased a Fortigate 30D for home use. It is connected on the
LAN to my BT home hub5 using an internal IP address.I can connect a PC
to the Fortigate LAN and set up a NAT to internet traffic just fine.I
decisded to try and build a VPN conne...
Hi want to be able to ssh to 10.18.68.75, which hits a NAT to go to
172.22.10.30, which should go over a VPN tunnel.it isnt working and I
get the following trace output;id=20085 trace_id=1031
func=print_pkt_detail line=4784 msg="vd-root received a pa...
I have a task coming up to migrate a HA pair of 200B's to 1200D's, I
have seen a link on the Fortinet Cookbook site about being able to copy
the config over. http://cookbook.fortinet....ile-one-model-another/ I
plan to ensure they are all on FortiOS ...
Hi All, Probably a silly question, I have 2 Fortigates at different
sites. We have just been provisioned with an MPLS circuit, turns out its
a layer 2 ethernet. I assumed I could just IP an interface at each end
on the fortigates and they could ping ...
Hello, Probably a newie question, but I manage 4 Fortigates, 3 on
FortiOS 5.2.4 and 1 on version 5.4.1, We have AD configured with TACACS+
and I want ot configure my fortigates for TACACS+. As I understand it,
there should be a tab under "Users & Dev...
Thanks for the responses guys, would blowing away the config and
reentering it, or a reboot help in the first instance? not totally
comfortable with killing the process as Fortinet do not seem to support
it? Thanks
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
