Hi Pros, I'm facing with a strange issue with iPhones and Macs. We use
Radius/WPA2 Enterprise Auth. for our SSID. If I connect the first time,
the device get authenticated, but if I change the SSID and want connect
back, it fails with wrong password....
Hi Specialists I try to create an IPSEC VPN between a Meraki (MX84) and
our Fortigate. All that I've found doesn't work, I'm not able to bring
the tunnel up and running. Fortigate 1200D on 5.4.5Meraki MX84 on MX
12.24 Fortigate Phase 1 Interface edit...
Hi Fortigate Gurus ;) I d'like to block some "bad" sources. For that,
I've added some addresses and georegions to a group and created a policy
and ordered as first from wan1 to lan. For example I d'like to block
China name : bad2lan srcintf : "wan1" ...
Hi,This drives me crazy and I didn't find any solution that is working
as expected.Our Setup2 FGT 1000C Active-Active Cluster (Firmware
v5.2.3,build670)12 Forti Access Points 221B (Firmware:
v5.2-build0225)Forticlient 5.2.3.0663Port 12 dedicatet for ...
That I'm not aware of it. We don't use Vdoms at present. Maybe this is
helpfull Fortigate HA upgrade with VDOM partitioning | Fortinet
Technical Discussion Forums
I assume you have HA A-P mode? Yes, there will be multiple time to
failover for upgrade multiple path firmware. Just do the steps as
recomended in the upgrade path. It will autofailover and upgrade your
entire HA stack.
7.0.2 running (almost) fine in my lab, but not much traffic. I would
avoid that very early release(s) in prod. 6.4.x in prod runs very
stable. Important to follow the upgrade path coming from 6.0.x. Will be
more then one update step to go to 6.4.x
Hi, and welcome to the Forums. As I guess, you have split tunneling
enabled. Just put the server public ip in your routing group (e.g. like
a internal ressource).
