Update : I have now got this working. I did have the network addresses
specified as @suthomas1 says above. The issue in my case was actually
related to how the network IP range is specified for the Address object.
It appears it must be specified as a...
Hi @ernest_louie, Thank you so much for taking the time to reply! The
output I get is : For the Site to Site (A-B) VPN: config system
interface edit "SiteA-SiteB" set vdom "root" set type tunnel set
snmp-index 17 set interface "wan1" next end For the...
Hi, I'm hoping someone can please help me with this related problem. I
have an issue with split-tunnelling on a dialup IPSec VPN. I have a
working configuration which I set-up via the wizard. Within that I have
enabled split tunnelling and then enter...
Hi @ernest_louie, Glad you got your config working. I have exactly the
same issue as you did: Site A to Site B have a permanent vpn tunnel that
is working both ways. I have dialUP IPSec VPN tunnel with it's own
subnet set-up on Site A FG that is allo...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
