Howdy experts, I have a firewall connected via a LAN link to my data
center and I also have a backup VPN connection via the Internet to the
same data center.The router at the remote office learns routes via EIGRP
and redistributes them into OSPF whic...
We have successfully configured RADIUS authentication against our RADIUS
server. We have also changed the "set remoteauthtimeout" in the global
options to 120 seconds to wait for the RADIUS server to respond. The
RADIUS server sends a message to the ...
We have 2 VPN dialup tunnels setup from a remote office to our data
center.Routing is dynamic via OSPF and working correctly.We do have a
number of very long lived connections (such as Remote Desktop sessions,
SSH and other for example) that break wh...
We have the following setup: Internal Interface: 172.16.1.1/24DMZ
interface: 192.168.0.0/24DMZ 2 interface: 192.168.2.0/24 Remote office
via site-to-site VPN: 192.168.0.0/16 We have to NAT the entire
192.168.0.0/16 network outbound using 172.18.0.0/1...
In FortiView the "Top Destinations" report lists "Destination -
Application - Sessions - Bandwidth".I'm trying to recreate that same
view in a report. Does anyone have this already?
Hi Tomas, Understood. The RADIUS server is only very lightly used for
VPN authentication and we have to give the users enough time to respond
to the request on their phones, hence the long timeout.
Thanks, that did the trick.I set the timeout in the RADIUS server to 120
seconds to match the "remoteauthtimeout" and now it only sends a single
RADIUS request.
