Hi all, I recently switched from a Juniper SSG firewall cluster to a
Fortigate 111c cluster and now my IPv6 routing is broke and can' t get
it to work. In our data-center we have a native IPv6 connection (dual
stack) and a transparent link to our hea...
With the help of my ISP we traced down the issue, they converted a
firewall trace to a wireshark format which show the problem. Somewhere
in the chain an incorrect MAC was used (mac of the old firewall
cluster). As i could not locate it on the device...
I configured 1 server to use the IPv6 address from the cluster as
gateway. Though i can ping the address i cannot ping any address behind
the router. It appears that the interface is not routing traffic when
the ip6-send-adv is not set. So basically ...
It is on it master. Maybe this is also causing my tunneled IPv6 over
IPv4 VPN' s to fail. So I think I will create a support request with
fortinet to keep track on any bugfixes this might solve.
That is exactly what I did, I configured the cluster, took it into
production and did a failover test. I also see (gui) in the routing
monitor that for some servers that reside in the data-center (routed by
the cluster) that their network (ip/128) is...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
