Hello,I am very new to OSFP and still getting my feet wet. I have three
Fortigates using OSFP in one area. There is an IP-SEC tunnel from Router
A to Router B and an IP-SEC tunnel from Router A to Router C. Both
Router B and C need the subnets from R...
Is it possible to make the following happen on a FortiGate?DNS 10.16.0.1
would be an internal DNS server on the Fortigate 80F. Clients would be
able to resolve other local clients using the Fortigate. If the DNS is a
public DNS, then the FortiGate wo...
I am using the Fortigate VM, 6.4.2 evaluation for practice (SSL-VPN is
said to be supported with the evaluation license) but the fortigate is
not accepting it's own generic cert. I am getting the following errors
and not sure why Note: "xxx.xxx.xxx" ...
I am using the Fortigate VM, 6.4.2 evaluation for practice (SSL-VPN is
said to be supported with the evaluation license) but the fortigate is
not accepting it's own generic cert. I am getting the following errors
and not sure why Note: "xxx.xxx.xxx" ...
Working with FortiManager 6.2.3, FortiGate 101F 6.2.3 and 2-FortiSwitch
548D 6.2.3 Created a standard template for my FortiSwitches. Since all
Switches will be the same, I figured it would be smart to build a
template. Both Gate and Switches are fres...
Thank you, @Toshi_Esumi Do any of your customers that sit in other VDOMs
connect to any services you host, such as FortiAnlayzer, FortiManager?
If so, how do you allow the gates to reach the services that are in
other VDOMs. Inter-VDOM links? Studyin...
Thank you both @srajeswaran and @Toshi_Esumi. The goal to not allow
Router C see Router B's subnets is that Router B is a separate company
than Router C. I have always been a fan of static routes and that how
both sites were setup prior to exploring ...
Yes,I wanted to give the product a shot. I am just 7 months into a 12
month contract and only in the past few weeks have we been able to start
turning on EDR from simulation to production. The culprits were: 1)
First month under contract, we were not...
Glad I could be of assistance. I've learned something so small (such as
a follow-up) can be something so big to someone else. Happy to hear your
issue was resolved.
Here is a topology of one the companies I support. What I created was
A-P HA Firewalls, redundancy of core switches and redundancy of uplinks
for access switches. The only single point of failure is if a access
switch at the IDF fails. This topology ...
