Dear all, I have my Fortigate 100E with 3 FortiAPs, the radius server is
a windows 2012 R2 Server and requires the user to be authenicated by the
AD server first before allowing the user to join the wifi network. I
would like to explore if it is poss...
Hello all, I have a 100E and 60E. The 100E has multiple subnets however
the the 60E only has 1 subnet configured.. my goal is the configure a
IPSec tunnel for 3 subnets over at the 100E so that they can reach the 1
subnet in the 60E. Note that all 3 ...
Dear all, i used to have the 110C but since is going to be EOL , i
changed to the 100E, i have 3 FortiAPs 221C which are connected and
using the firewall's default controller to control the fortiAPs. Over
the last few months, the fortiAPs will just g...
Hello all, I need some help on the following, i am trying to stop access
of all websites (browser) from the remote office using the fortigate
30E. The users should only have access to the mail server and some
applications which are on the internet (e...
Hello all, I will like to check, Forti APs have been added to my
Fortinet 110C firewall, Configured the controller's Captive Portal for
guest use. It works well however with most mobile phones it goes to
'sleep' now and then so when it connects back ...
Opened a case with fortinet and this is what they say. “From the logs,
we could see CAPWAP Discovery Request/Response between FAPs and FGT, but
when FAP sends SSL Client-Hello packet, there's no Server Hello Response
packet from FGT. Thus FAP fails t...
Hello all, Thanks for the tips! i found out just a simple first rule of
any to any and allowing only the dns service for that rule allows the
url resolution to work perfectly. of coz the separate rules to block off
http / https traffic will be in sep...