Hello all! Is there a recent Forticlient IPSEC enable only?. Versión 5
is highly intrusive and conflicts with my other antivirus. I´m using
4.2.8.308 on my W7SP1 x64, but I´ve problems with dual LAN and WLAN
interfaces active. Thank you in advance...
Hi all. I´ve configured a FL100 and I want to repair database. I Follow
this steps: 1- Change logs mode from standalone to collector 2- Disable
sql database 3- remove database: execute sql-local remove-db All from
cli. But i can not enable database ...
Hi all!. We are upgraded all our FGT80C to V5.0.1. All Works fine but
Outlook Anywhere through Forti to remote Exchange Servers do not work
with UTM profiles activated. SSL inspection is disabled. Outlook
Anywhere uses HTTPS 443 TCP port to connect t...
Hello all! In a configuration with a F80C I need to set up route
failover on WAN1 and WAN2 interfaces. There are two ADSL routers
connected to them, but public IPs are consecutive x.x.x.103 and
x.x.x.104. Generate separate subnets for interfaces is n...
Hi all!. I recently downgrade a 80C appliance from 4MR2 to 4MR1.4. 2
days after, ISP change their DNS and Fortiguard web filter fails at this
moment. Investiganing I can see this in system configuration: Show
system dns: config system dns set primary...
Hello again. I've installed wireshark in the network and I've monitored
LDAP queries. The problem reproduces with user that use a Exchange
Mailbox and configure mobile devices to configure antivesync. AD creates
a subkey in the user "CN=ExchangeActiv...
Hello emnoc. diag test authserver ldap authenticate 'old_user' against
'LDAP_xxxx' succeeded! Do not show groups, but authenticate 'new_user'
against 'LDAP_xxxx' succeeded! Group membership(s) - CN=Mobile
Users,OU=Security Groups,OU=MyBusiness,DC=xxx...
Hello all. We have upgraded same Fortigates to 6.0 FortiOS and users
fail to login when use LDAP. Radius authentication with windows NPS work
fine and we have configured as alternative. If I create a new user in
Active Directory works fine with LDAP ...