Fortinet Community

metz_FTNT · 05-31-2023

Description This article describes the effects of the 'disable' action for local categories in a web filter. Scope FortiOS 7.0, 7.2, 7.4. FortiProxy 7.0 and above. Solution Local categories can be created to override FortiGuard URL categorization. In...

metz_FTNT · 03-28-2023

Description This article explains an issue where an intended webfilter replacement message instead shows as a 'Your connection is not private' warning. A solution is provided. Scope Any supported version of FortiGate. Solution When the webfilter prof...

metz_FTNT · 02-27-2023

Description This article describes 'ssl-inspection' usage for URL Web filter. Scope FortiGate. Solution For plain text HTTP, traffic HTTP request is not encrypted. Therefore 'ssl-inspection profile' is not mandatory and FortiGate can identify the ful...

metz_FTNT · 01-26-2023

Description This article describes the meaning of the message 'webfilter_command_block' and how to allow the traffic to pass through the web filter. Scope FortiGate. Solution The traffic can be blocked by the web filter and the following message can ...

metz_FTNT · 11-29-2022

Description This article describes the difference between the 'Allow' and 'Exempt' actions in static URL filter configuration. Scope In the Web UI, the static URL filter and FortiGuard category filters are both located within the Web filter profile c...

metz_FTNT · 01-13-2023

Hello, Think of the Zones like different interfaces, you can set up sd-wan zone with members port1 and port2 and set the zone as destination intf in a policy. Then you can create a specific rules for how to balance the traffic between the interface m...

metz_FTNT · 12-02-2022

Check here: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Virtual-IP-VIP-port-forwarding-configuration/ta-p/198143

metz_FTNT · 12-02-2022

Hello, On the Firewall policy, make destination to be the VIP object, instead of "ALL" and it will work.

metz_FTNT · 12-02-2022

Hello, You can try with webfilter static URL. Simply create a Static URL entry to block "www.linkedin.com/jobs/ " https://community.fortinet.com/t5/FortiGate/Technical-Tip-Using-a-static-URL-filter-feature-to-allow-block/ta-p/193086 Note: You must al...

metz_FTNT · 12-02-2022

Hello, You don't get a straight answer, because there isn't. A default value which will protect all possible environments will practically have block access to internet. -AntiVirus default will protect you as overall there is not a lot to modify on i...

Fortinet Community

User Statistics

User Activity

Technical Tip: The 'disable' action in local categories in a web filter

Troubleshooting Tip: Webfilter replacement message is replaced with 'Your connection is not private' HTTPS warning

Tecchnical Tip: 'certificate-inspection' and 'deep-inspectio'n for URL filtering

Technical Tip: Meaning of webfilter_command_block message

Technical Tip: Difference between action 'Allow' and 'Exempt' in static URL filter

Re: What difference between SD-WAN zone and SD-WAN rules?

Re: Port forwarding not working

Re: Port forwarding not working

Re: Need to block linkedin Jobs

Re: Protected by default config or not?

Re: Need to block linkedin Jobs

Re: Benefits of using proxy policies vs firewall p...

Re: Benefits of using proxy policies vs firewall p...

Technical Tip: FortiGate dashboard 'sessions' widg...

Re: Fortigate 61F can't allow Pinterest

Re: Port forwarding not working

Re: Unable to toggle on FortiGuard Spam Filtering

Re: Benefits of using proxy policies vs firewall p...