Good Day, I am utilizing two WAN links, they both have different public
ip addresses. I use static route for WAN1 and I use policy routing to
send different services and devices over WAN2 due to WAN1 being
overutilized. I have one IPsec tunnel betwee...
Good Day, Is it possible to put a traffic shaper for all traffic that
goes over the IPSec interface? I tried to do this and it does not seem
to pick up all the traffic that goes through the tunnel or drop the
excess packets. Would appreciate some gui...
Dear Support, I have a HQ site : 10.1.0.0/23 Remote site: 10.2.0.0/24 I
set up IPsec VPN site to site between the two FortiGates and used the
wizard. All devices on the different subnets can reach each other over
the ipsec vpn except for the FortiGat...
Good Day, We upgraded our FortiGate and FortiAnalyzer from 5.6.3 to
6.0.2 following correct path and procedures, both were successful
however I have noted a funny changes in the way our logs are recorded.
It appears that certain sessions especially s...
Hi, I have a physical interface which have two ports that are configured
in LAG and those ports are tagged with all my VLANS. We have 22 Cisco
Switches in all departments which are also tagged with all the vlans.
Under my physical interface (10.1.0.x...
Good Day, What you did with the web filter and application filter looks
in order. I would recommend that you double check your policies and make
sure the source are contained in the policy where the filters are
applied on. Also check if there are per...
Hi, I thank you for guiding me in the correct direction, after adding
more phases to my tunnel and adding the correct policies I managed to
get it working.
Good Day Thank you for your reply I also found this yesterday. I
downgraded both our FortiGates and Analyzer to 5.6.6 which seems to be
incredibly stable and bug free compared to 6.0.x . Regards Danté
Hi, FortiGate 100EI found 6.0.2 had many bugs, the biggest ones for us
were: -Logs not working and wrong bandwidth accumulation on reports and
widgets. Streaming same sessions gets summed to each other and forms a
huge amount of bandwidth but is not ...
