Hi Guys,So we were using a router with two VLAN 10 and 20, connected to
two different APs and everything was working fine.Today we purchased a
firewall and we placed it before the router (refer to the image). I
created two static routes 192.168.110.0...
I will configure 14 VLANs in total. I will connect all Firewall
Interface to one of the L2 Switch and I will cascade the other L2
Switches with that L2 Switch. In this case, do we need Trunk? Please
check if any problem with such configuration.There ...
Hi Guys,I need help regarding access to the Web Server.Firstly, please
refer to the image I have attached.Our company has 2 different sites.
Site A has a Web Server with two different Websites hosted (let's say
xxx.com and zzz.com) and our employees ...
Hi Guys, I am extreme beginner on firewalls and network. I have a
question, which will sound very naive. My brother company has around 500
employees in the same branch where he works. They have two firewalls in
HA and then switches and then their ser...
Hi Guys,My company has three branch offices in different locations. We
have Fortigate 100F at our main office. I wanted to create a
site-to-site VPN between my main branch and one other location. My main
branch has a Public IP but my other branch doe...
Hi,But my question is that if internal data can be routed through
switches and doesn't need a firewall for that, then what is the
requirement of 25G on a firewall?
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites
