Hello, I have couple of 200D in HA mode (active/active), every night
they goes "out-of-sync", then in about 30/40 minutes back in "in-sync",
I receive message that give me alert. I have this problem every night. I
try reboot them but not change. Duri...
Hello, I try in every mode to come up vpn tunnel between Fortigate with
5.2.2 and pfSense, I receive error before phase 1, with message
"ignoring ike request, no policy configured" but I check 100 times...
every is correct on both side. This is first...
Hello, I don't understand how I can disabled SSL when Web Filter is
enable. I can't swich off. I can only switch off if I disabled web
filter. Have you some idea ? I have Fortigate v. 5.2.1build618 (virtual
appliance).Thanks M.
Hello, I solve, the problem is I don't set firewall rule on Fortigate, I
mean from local to remote network. I think I can do after tunnel up only
to flow traffic.Thanks to all for helps M.
emnoc wrote:Here's what you need todo; on the phase1 at the fortigte
unset and disable the following; edit "PF01 EGSI" set mode-cfg disable
set keylife 14400end On phase2 you need to specify the exact local and
remote subnet in the same fashion as pf...
This is error I take from debug in Fortigate: ike 0: comes
37.59.XX.XX:500->37.72.XX.XX:500,ifindex=2.... ike 0: IKEv1
exchange=Identity Protection id=d79016b120be884f/0000000000000000
len=196 ike 0: in
D79016B120BE884F0000000000000000011002000000000...
