Description This article describes how to block Ontario OHIP card
numbers using DLP local regex. Scope FortiGate. Solution Below regex
pattern below can be used to block Ontario health card numbers: config
dlp dictionary edit "regex" set uuid 123444 ...
Description This article describes PPTP Windows VPN disconnects in a few
minutes passing over an IPSEC tunnel. Scope FortiGate. Solution In some
scenarios, PPTP VPN needs to be connected as well while keeping using
IPSEC dialup VPN to access remote r...
Description This article describes the VRRP configuration between
FortiGate and Nortel routers. Scope FortiGate. Solution VRRP can be
configured between FortiGate and Nortel routers for traffic redundancy.
FortiGate Configuration: config system inter...
Description This article describes how to handle an issue with traffic
passing through a VXLAN where SSL traffic fails to load. Scope
FortiGate. Solution VXLAN passes all traffic except SSL traffic.
Troubleshooting steps: Verify traffic flow with and...
Description This article describes that the traffic is not passing from
one VLAN to another internally in Azure despite all policies Scope
FortiGate. Solution The User traffic is internal, coming from VlanA to
VlanB in Azure Cloud IPV4 Policy: config...
Hello, you can view below link for
reference:https://github.com/GoogleCloudPlatform/community/blob/master/archived/using-ha-vpn-with-fortigate/index.md
Hello, this kb might help you :
https://docs.fortinet.com/document/fortimanager/7.2.0/fortisoar-7-2-0-r1-administration-guide/369363/quick-start#Enabling
Hello, you can verify below settings: -correct source -service(ports)
are allowed -correct interface - there is no deny policy at top of allow
policy also make sure in policy schedule portion it has correct values
For -7200 error, kindly see the kb :
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Credential-or-SSL-VPN-configuration-is-wrong-7200/ta-p/202281