Thanks! that works! Ver 5.6.12 gustav.koekemoer@voxtelecom.co.za
wrote:Hi All I believe I have just fixed this issue. If you setup your
Analyzer under "config log fortianalyzer setting" it seems to always
take preference in Fortiview 5min,1H and 24H ...
Hi, Yes i did, in my setup, i have point2point to my ISP - with private
IP.and the Public subnets are on different interface. i changed the
interface for the ipsec tunnel to be the P2P interface, and set the
Local Gateway to the IP from the local int...
Hi, im trying to setup IPsec tunnel with ike v2 between Fortigate to
Cisco ASA. i set all the needed settings, static routes, policies
etc..the tunnel is up in both,But traffic failed to back from FG to
Cisco through the tunnel. the error i got: id=2...
