Fortinet Community

sachitdas_FTNT · 02-05-2023

Description This article describes the recommended port speed configuration when using SFP module 1000-Base-SX or LX. Scope FortiSwitch version 6.x and above. Solution Reference Links: https://community.fortinet.com/t5/FortiSwitch/Technical-Tip-Recom...

sachitdas_FTNT · 02-03-2023

Description This article describes BSS coloring on the FortiAP F series. Scope ALL FortiAP-XXX F models platform. Solution For more info about BSS coloring, visit these links: - https://docs.fortinet.com/document/fortigate/7.0.0/new-features/670582/a...

sachitdas_FTNT · 02-01-2023

Description This article describes supported SNMP traps on FortiSwitch. Related document: https://docs.fortinet.com/document/fortiswitch/7.2.3/administration-guide/261585/snmp Scope FortiSwitch version 7.2.x and above. Solution Name, relative to MIB ...

sachitdas_FTNT · 11-29-2022

Description This article explains the meaning of the message 'Non-802.3af powered device' that sometimes appears on a FortiSwitch when executing the command 'get switch poe inline'. Scope POE and FPOE FortiSwitches 6.4.x, 7.x. Solution An example of ...

sachitdas_FTNT · 09-22-2022

Description This article describes steps to configure separate ISL between 2 Managed FortiSwitch for data traffic. Scope FortiGate and FortiSwitch 6.4.x and above. Solution Sometimes, the requirement is to segregate data traffic and control traffic b...

sachitdas_FTNT · 01-03-2023

Hi, From what I understand is the issue specific to Macbook? Do other devices like windows laptops also witness the same problem?

sachitdas_FTNT · 09-27-2022

Hi Imran, Please upgrade FSW to latest version 7.0.5, dhcp server on fsw is supported from later versions.

sachitdas_FTNT · 09-23-2022

We can enable below options from fgt on the vlan interface. FortiGate-300D # config system interface FortiGate-300D (interface) # edit vlan10 FortiGate-300D (vlan10) # set switch-controller-igmp-snooping enable FortiGate-300D (vlan10) # set switch-co...

sachitdas_FTNT · 09-23-2022

For managed FSW, please push config from fgt to fsw. https://docs.fortinet.com/document/fortiswitch/7.2.1/fortilink-guide/173274/configuring-igmp-snooping-settings

sachitdas_FTNT · 09-23-2022

Hi, Are these standalone FSWs or managed by FGT? If managed by FGT, you need to push the config from the FGT. You can check in the logs for any event due to which config is getting erased. exec log filter view-lines 1000 exec log display

Fortinet Community

User Statistics

User Activity

Technical Tip: Recommended port speed configuration for SFP module 1000-Base-SX and 1000-Base-LX

Technical Tip: BSS coloring on the FortiAP-F models

Technical Tip: Supported SNMP traps on FortiSwitch

Troubleshooting Tip: Power Fault: Error Type 28 (Port is off: Non-802.3af powered device)

Technical Tip: Seperate Inter Switch Link (ISL) between Managed FortiSwitches for data traffic

Re: FortiSwitch: Spanning Tree Issue - Port disabled

Re: FS1E48 || v6.0.1,build0036,180727 (GA) || DHCP option

Re: IGMP SNOOPING configuration getting erased.

Re: IGMP SNOOPING configuration getting erased.

Re: IGMP SNOOPING configuration getting erased.

Re: Cisco breakout DAC on FortiSwitch

Re: Wireless Client Isolation

Re: Question: two Vdom vlans to the same port ( na...

Re: How to set up FG 40F to manage two independent...

Re: How to set up FG 40F to manage two independent...

Re: Fortiswitch fs-148e-poe SFP or SFP+ Ports?

Re: Fortilink across L3 (FG-FSW only)

Re: Question: two Vdom vlans to the same port ( na...

Re: Fortiswitch ports not showing - blank page

Fortinet Training Institute