What would be the best way to connect a fortigate behind another
fortigate? I have the ISP coming into the wan port on fortigate 1. I
need to setup a sub tenant in that space with their own fortiagate that
is going to share the isp connection. DMZ po...
Fortiwifi 90D. This is driving me nuts, we want to replace a switch
plugged into LAN1, fortinet is configured for a soft switch. When we
plug the new switch into port 1 it does not pass any traffic, What am I
missing. I see no VLANS configured and I ...
All I have enabled is web filter -> url filter. I have one website to
allow then block * as wildcard and for some reason it blocks the allowed
sites and seems to be only https sites, my http sites in the allow list
works but my https sites do not. Do...
I have a situation that I can not figure out. I have a Fortinet 60D with
no UTM no website filter and I think ssl packet inspection is turned
off. Dual wan fail over VZ primary on WAN1 comcast secondary on WAN2
using static route administrative dista...
I'm using the windows dialup template so I do not have a split tunnel
option. I tried the command line command and get an error. I tried to
re-create the VPN using forticlient as that seems the only template that
has split VPN option but I don't thin...
Still couldn't get this to work, all the internal ports are configured
into a softswitch bonded with the wifi. A laptop works fine plugged into
the port. A dummy 5 port switch works fine plugged into the port. A
cisco SG220 will not pass traffic on t...
Still wouldn't work so what I did was use the category blocking, I
blocked every category and unrated, then created an allow white list for
a custom category and that seems to work.
