Hi there. We have noticed from time to time logon FSSO missing user
logon events in DC agent mode, specially when one of the two Collector
Agents is down for a long time (more than 5 minutes, i.e. 1-2 hours).
Some logon events do not reach any of the...
Our scenario: FG500D v.5.2.7 and FSSO (DC agent, Collector agent in
advanced mode) Is it possible to allow Internet access with simultaneous
Windows users that share virtual station (share IP address)?We are
testing a new virtualization platform (Nut...
We have configured in the two Collector Agents servers your
suggestions,- enable DNS in the DC Agents again to take at least some
load off the Collector Agent- if you don't have roaming users (changing
IPs/subnets), you can disable the IP verificatio...
Thank you for your quick answer and suggestions. We are using DC Agent
Mode, and the two Collector Agents are not busy regarding CPU and
memory. In the beginning, the DNS check was disabled in the 3 DCs (by
default). However, the unprocessed logon ev...
One more comment regarding this interesting post. We are running v5.2.7
on 2 FG500D. We are facing similar scenarios (Application Control, Web
Filtering and exceptions) like those ones you have already explained in
this post. As far as I have underst...
Thank you for your reply and your suggestion! Sorry for the confusion.
Just 3k users!. Regarding upgrade to 5.2.8 we prefer avoid frequent
updates in a short period of time (too risky). Besides, from the upgrade
path we have checked that 5.2.7 is rea...
