I am currently demoing a Fortigate 200D. So far the GUI makes sense
(mostly because I used a Fortigate 200A years ago) support via the
vendor we are demoing it with has been good. I have always been
interested in Barracuda's offerings when it comes t...
Our Fortigate 200A (v4.0,build0513,120130 (MR3 Patch 5) is set up with
VPN. When I try to use the FortiClient (5.2.0.0591) I can connect but I
don' t see any packets being received and therefore can' t use Telnet or
RDC But when I connect to the web ...
I think I found the issue but not sure how to fix it. Below is what I
did: We have a Cisco 3575 that the servers routers switches are hooked
into. They are all on Vlan1. So I hooked up a machine directly to the
Fortigate bypassing the Cisco 3750 and ...
After restarting I can ping the gateway of the Fortigate when connected
using the FortiClient. But I stiil cant ping anything else in the LAN
192.168.x or 10.0.0.x .. In the Users-->Usergroup -->usergroup SSL_VPN
.. Below is what I have selected
Here are the settings login as: administrator administrator@10.0.0.247'
s password: Cascio $ show vpn ssl settings config vpn ssl settings set
dns-server1 10.0.0.231 set dns-server2 192.168.0.33 set tunnel-ip-pools
" SSLVPN_global" end " You have to ...
I don' t know if this helps or not but using the Web-Portal interface
using the " Connection Tool" I can Ping, RDC, Telnet to anything on the
LAN but I am unable to do this using the FortiClient..
