You are leaving our website

Daniel_FTNT · 01-16-2019

Yes, then using Standalone Mode (maybe with FortiSwitch Cloud) is what you should aim for (for now).Do you mean the stack master? Not sure what your actual setup is and how your Cisco Switches are configured. You might consider consulting a partner o...

Daniel_FTNT · 01-10-2019

Hi Flavio, hi Daniel, keep in mind you have to option if you have 3rd party switches in your topology especially between FGT and FSW (most likely Core/Distribution switches right?):1. Use the FortiSwitch in Standalone Mode. This gives you the full fe...

Daniel_FTNT · 01-10-2019

Hi Kevin, your are right, you won't be able import your 200D config out-of-the-box.But you have a couple of options:- Use the FortiConverter Service (one-time offer since E-Series) for your new 200E to get the .conf file migrated if you want to keep ...

Daniel_FTNT · 01-10-2019

The estimated bandwidth you can set in GUI: Network>Interfaces (or set estimated-upstream/downstream on CLI) is for GUI display only (dashboard etc.) With the SD-WAN feature you can also set on the cli "set inbandwidth" and "set outbandwidth" per int...

Daniel_FTNT · 01-10-2019

Hi F. in regards of what you want to do, the combination of FortiGate and APs should provide what you are asking for feature wise. Keep in mind though how to distribute power and ethernet for your endpoints and APs. You might want to consider PoE cap...

User Statistics

User Activity

Re: Configuration FortiLink across non-Fortiswitch

Re: Configuration FortiLink across non-Fortiswitch

Re: 200D to 200E - Easiest way to migrate / upgrade ?

Re: upgrade of Internet bandwidth

Re: Dummies question

KCS

Fortinet Training Institute