Hi All, I want create a one to one static NAT for 2 servers through a
fortigate-VM firewall. Server 1 VIP: (192.168.2.2) -> Server 1 Private
IP: (10.0.3.2) Server 2 VIP: (192.168.2.3) -> Server 2 Private IP:
(10.0.3.3) I cant seem to figure this out ...
Hi All, I am NATing 2 servers through a fortigate firewall. Internet |
Fortigate (NAT) | | VM1 VM2 When I check the access logs on the servers
being NATed (VM1, VM2) all the traffic has the source IP of the
fortigate server. How can I make it so the ...
HI, Wondering if its possible to isolate a group of IPs from another
group of IPs on the same subnet. I am using Fortigate-VM64 For example:
Subnet: 172.70.0.0/16 IP group A: 172.70.0.10, 172.70.0.11 IP group B:
172.70.0.100, 172.70.0.101, 172.70.0.1...
I am using the Fortigate VM 4.0. On first install it says I have 14
evaluation trial. It looks like I need the following license. VM License
FortiGaurd (maybe ?) and optional FortiClient Software How would I
install what I need from command line inst...
Sorry for being a nitwit here but figured out the issue. Rule number #1
of IT: Always check the firewall of the server first. My co-worker,
unknown to me, had set iptables to only accept traffic from fortigate
private ip address. This is why i could ...
Sorry for being a nitwit here but figured out the issue. Rule number #1
of IT: Always check the firewall of the server first. My co-worker,
unknown to me, had set iptables to only accept traffic from fortigate
private ip address. This is why i could ...
Sorry I started my config over removing all unnecessary IPs, since I
still am unable to get this working. Below is all my settings simplified
(reposted). Anyone see what I am missing here? Thank you very much for
your help! (VIP Updated)
Sorry I started my config over removing all unnecessary IPs, since I
still am unable to get this working. Below is all my settings simplified
(reposted). Anyone see what I am missing here? Thank you very much for
your help! (VIP Updated)
