You are leaving our website

BryanS · 08-01-2019

Hello all, hoping someone has an idea to help me out on this config issue. I have a full Fortinet setup between 2 buildings connected via fiber. No issue. FTG in HA and 5 48 port switches all managed on the FTG. My addition (and problem) is adding my...

BryanS · 04-24-2019

I have an FVE 300 and have found it will not auto-discover any new handsets for over 90 mins. After that time, they do get discovered and configuration happens quickly after. I just can't figure out why it takes this long. Has anyone had this happen?...

BryanS · 04-22-2019

I am missing something, I must be. In 5.6 OS, Security Profiles > Web Filter and I can see the default (or other) profile and I had a option for users who where allowed to bypass a block, via user account locally. On 6.0.4, I no longer have that opti...

BryanS · 04-18-2019

Anyone have a document or know how to change the default timeout of the 570 main screen? All ours go blank after 60 seconds, no matter what power saver settings are on the phone. Using a FVE-300

BryanS · 04-03-2019

Hello all, have a VPN project and having a problem. Almost got it though... I have a 200E and a test 60E at a remote site I want to set up a VPN between the 2 sites, but have redundancy for the 200E if an ISP goes down at the 200E location. 200E conf...

BryanS · 04-26-2019

The address was in the system, still no change. I started adding my 570 phones, they come right up. Tried another 345, they took almost 95 mins to be discovered.

BryanS · 04-23-2019

Found it. Backlight timeout, not power saver.

BryanS · 04-23-2019

Why not use port forwarding? You can map the ports and IPs as well as restrict who can use that port if needed as well, to further lower who can get in. If not VPN or Port Forwarding, it would have to be an outbound type connection that you can't rea...

BryanS · 04-23-2019

Thank you both. I knew it was something small I overlooked. Been a few years since I loaded up a FTG from scratch. Thanks again.

BryanS · 04-22-2019

You can categorize it yourself, on demand. Assuming you use Category based filters: Go to Security Profiles -> Web Ratings Overrides At the top, create a custom category as 'allowed' Once back on Web Ratings Overrides page, Create New. Add the domain...

User Statistics

User Activity

FortiSwitch Install Problem

FVE Auto Discovery

Web Filter 6.0.4

FON-570

Redundant VPN config help

Re: FVE Auto Discovery

Re: FON-570

Re: Acces to internal Emby server from WAN

Re: Web Filter 6.0.4

Re: Blocked website